- The machine performs Pin Gauging(measurement to 10microns), Automatic Pin Selection(pin carousel) and Pin Checking.
- Pin Gauging - the thermostat is cleaned and the machine measures the length of the pin required.
- Pin Carousel - using the measurement from the Pin Gauging, the Carousel rotates to present the pin container with the required pin size to a fixed position, next to the cleaning station Thus, the operator always picks up a pin from the same position and does not have to look for the correct pin.
- Pin length checking - the thermostat with the pin is measured again to check that the chosen pin is the correct length.
- Throughput of 400 to 500 parts per hour from a single operator
- Microprocessor control with keyboard and display.
- Standalone machine requires only clean, dry compressed air. and 220VAC power.
- Small size : 700mm x 350mm x 350mm
- Low weight: 35kg
- More than 30 sold so far in China and Vietnam.